Garbage Disposal Installation in Denver, CO
A new disposal has to fit the sink flange, connect to the drain properly, and run on a working switch. We fit the unit to the sink you have and test it under load before we leave.
Service overview
Fit, drain, and switch before the unit goes in
Garbage disposal installation in Denver means fitting a new disposal where an old one has failed or where a kitchen is being fitted out, and the work starts with the sink and the drain. The sink flange size, the drain position, and the space under the sink decide which units will fit, and a disposal bought without checking those often does not sit in the cabinet at all. The drain connection matters just as much: the disposal has to connect to the trap and the drain line so it empties properly, and the dishwasher connection has to be set up correctly when there is one. The switch and the power supply are checked at the same time, since a disposal that cannot be switched on safely is not an install.
! Common warning signs
Will it fit under this sink
Sink flange size, drain position, and cabinet space decide which units work. We measure before the disposal is chosen, not after it is bought.
Drain and dishwasher connection
The disposal has to connect to the trap and the drain line, and the dishwasher hose has to be set up correctly when there is one.
Switch and power supply
The wall switch and the power supply are checked before the unit goes in, so the disposal can be switched on safely from the start.
Scope of work
What a garbage disposal installation includes
A disposal installation runs in a set order: measure the sink and the cabinet, check the drain and the switch, mount the unit, then test it under load. Here is what it covers.
-
01
Measuring and selection
We measure the sink flange, the drain position, and the cabinet space, and confirm the disposal you have chosen fits before any work starts.
-
02
Removal and drain check
The old unit is removed and hauled away. The drain and trap are checked, and the dishwasher connection is inspected when there is one.
-
03
Fitting and connecting
The new unit is mounted to the sink flange, connected to the drain and the dishwasher hose, and wired to the switch.
-
04
Testing under load
We run the unit with water flowing, check every connection for leaks, and confirm it grinds and drains properly.
What we check under the sink before we start
Under the sink of an older Denver kitchen, the trap may be original brass or cast iron, the drain may be slow, and the power supply may be an old switched outlet that needs attention. We check those before the install so a slow drain or a faulty switch does not turn a disposal swap into a bigger job.
Call (720) 599-7253Tools and methods we use
Flange and mounting tools
Sets the sink flange and mounts the unit so it sits level and seals properly to the sink.
Drain and trap tools
Connects the disposal to the trap and the drain line so it empties properly and the trap holds its seal.
Electrical testing
Checks the switch and the power supply so the unit can be switched on safely from the start.
Leak and load testing
Runs the unit with water flowing and checks every connection so no joint is left untested.
Local execution
Disposal installs in Denver run into the city's kitchen mix. In Highland and Cherry Creek, remodelled kitchens often add a disposal where there was not one before, and the drain, the dishwasher connection, and the switch all have to be planned around the new unit. In University Park and Berkeley, older kitchens with original sinks need careful measuring, because the flange size and drain position do not always match a modern unit. Denver's older drain lines also matter: a disposal that drains slowly is sometimes a drain problem further down the line, and we test the drain before the install.
What Denver kitchens ask of a new disposal
What to tell us when you call
New disposal to fit? Call to discuss it
What to do while you plan
Measure the sink and the cabinet before choosing the unit: a disposal that does not fit the flange or the space under the sink is a return trip. Call (720) 599-7253, describe the disposal and the sink, and we will confirm availability when you call. If the old unit is leaking under the sink, shut off the angle stops and place a bucket beneath the trap.
What to expect from your disposal installation
Call and describe the job
Call (720) 599-7253 and tell us which disposal you have chosen, the sink it is going on, and whether there is a dishwasher connection. We set a time that fits your day.
Measuring and drain check
We measure the flange and cabinet space, confirm the unit fits, and check the drain, trap, and switch before any work starts.
Fitting and testing
The old unit is removed, the new one is mounted and connected, and it is run with water flowing to confirm it grinds, drains, and stays dry.
What shapes the cost of garbage disposal installation in Denver
A disposal installation has no published price: the unit, the sink and the state of the drain and switch underneath set the scope. We talk through what the install involves before any work starts, and agree the scope with you before any work starts.
Unit type
A standard unit and a larger, more powerful unit are different installs with different mounting and drain needs, and the unit sets much of the scope.
Sink and cabinet
A standard sink with clear cabinet space is simpler to fit than an older sink with a non-standard flange or a packed cabinet.
Drain and switch condition
A sound trap and a working switch keep the job simple. A slow drain or a faulty switch adds work before the unit can be connected.
Before any work starts
Frequently asked questions
Will any disposal fit my sink?
Not necessarily. Sink flange size, drain position, and cabinet space decide which units work, and a disposal bought without measuring often does not fit. We measure before the disposal is chosen, not after it is bought.
Can a disposal be added where there was not one before?
Often, yes, but the drain, the dishwasher connection, and the switch all have to be planned around the new unit. We check the sink and the cabinet before advising on what is possible.
Does a new disposal need a permit in Denver?
Swapping a disposal for a like-for-like unit is generally exempt from a permit under the Denver Building Code. Changing the drain run or the electrical supply can trigger one, and we will tell you if the job you have in mind crosses that line.
What should never go down a disposal?
Bones, fibrous food, grease, and coffee grounds are the usual causes of jams and slow drains. A disposal is for small food scraps with cold water running, not for everything from the kitchen.
Related services
Sink Installation
A disposal mounts to the sink, so if the basin is being replaced too, our sink installation page covers basin fitting, drain connections, and sealing.
Garbage Disposal Repair
If the current disposal still has life in it, the repair page covers jams, leaks, and units that have gone dead.
New disposal for your Denver kitchen? Call us
Call (720) 599-7253 about the disposal and the sink. The fit is checked before any work is agreed.